A heavy body armor suit known as a bomb suit, EOD suit, or blast suit is made to withstand the pressure created by a bomb and any possible fragmentation the bomb may release. It is typically worn by skilled workers engaged in bomb disposal. A bomb suit must protect every area of the body because the hazards posed by a bomb’s explosion can badly injure your whole body, in contrast to ballistic body armor, which typically focuses on protecting the chest and head. You can look for the best EOD suit online.
For best protection, the bomb suit has overlapped sections. As a result, the suit offers multiple forms of protection. It prevents or deflects projectiles that an exploding device could fire. Additionally, it prevents or significantly reduces the pressure of the blast wave that is transferred to the suit’s wearer. Layers of Kevlar, foam, and plastic are used in most bomb suits, including the Advanced Bomb Suit, to carry out these tasks.
Bomb suits have a set of wrist guard attachments, interchangeable gloves for maximum protection. This allows for the necessary movement and protection for the activity at hand while preventing cross-contamination of any evidence that may be discovered (e.g., fingerprints).
When conducting reconnaissance, “render safe,” or disruption procedures on possible or verified explosive hazards, EOD technicians wear bomb suits. Should the threat device detonate, these suits must offer extremely high levels of protection from fragmentation, blast overpressure, heat, and tertiary impacts. The suit can also drastically reduce their ability to move about or be aware of their surroundings. Buy the best EOD suit online.
EOD suit features:
The bomb suit can weigh more than 125 lbs. and offers a large field of vision, flexibility, and movement. Additionally worn are an EOD helmet and a Self-Contained Breathing Apparatus (SCBA), which each adds 60 lbs of weight but supplies breathing air regardless of the surrounding atmosphere. The weight of their PPE as a whole and a lack of appropriate cooling can limit EOD operators’ time to complete disarming procedures. An incomplete mission can have disastrous consequences. Current cooling methods involve stuffing ice into a web-like vest and letting melted water fall down the upper body due to gravity.
Helmet:
The helmet weighs only 3.6 kilograms (7.9 lb) with the visor and 2.7 kilograms (6.0 lb) without and is made of a lightweight, high-strength fibre that protects pieces travelling at speeds of over 683 m/s. The ergonomic design enables easy movement and exceptional visibility with little neck strain. The visor’s margin of safety against repeated fragment strikes is increased by its fully laminated acrylic and polycarbonate structure. The visor offers crystal-clear, distortion-free vision and is also detachable. The helmet has a forced air ventilation system, speakers, and microphone that meet MIL-SPEC standards. The power pack uses common 9V batteries and can run the ventilation system continuously for up to 5 hours. To prevent snagging, all wiring that controls the ventilation system in the helmet and suit is integrated within the suit itself.
Role of EOD suits:
The critical aspects of EOD suits are described as under:
Cooling system:
A cooling system is an optional feature for users in warm settings. This is worn below the suit and is made up of a network of capillary tubes that are sewed into a Nomex bodysuit. This is linked to a pump and a 2-litre water tank that moves ice water throughout the body. An ideal working temperature can be maintained by adjusting the cooling rate.
Fragmentation:
The shards released by the device and other nearby items, which can penetrate the body at supersonic speeds, pose the most threat to the IED technician. The suit’s lightweight, detachable composite ballistic panels protect the upper torso, neck, shoulders, arms, and legs while allowing for mobility and lightness. Additionally, rigid ballistic panels are included with the suit to further protect the chest, lower abdomen, groin areas. These have undergone testing at top speeds of 1667 m/s.
Heat:
The user is protected from burns by the outer layer, which is made of a Nomex/Kevlar flame retardant mixture.
Overpressure:
The pressure wave from an explosion can seriously harm the lungs, eardrums, and other body parts. The suit’s construction limits the effects of overpressure on the body with both sets of ballistic panels, and the collar entirely encloses the neck region and extends over the helmet.
Impact:
The differential acceleration between the head and torso caused by the blast’s impact on the body can break the neck and harm the spine. Therefore, the suit has an articulated spine protector, and the high collar overhangs the helmet to prevent excessive head and body acceleration.
Conclusion:
These suits are affordable, effective, and efficient. As a result, they offer the most comfort, flexibility, and safety. In addition, the body armour can withstand the pressure and shards of explosions. It safeguards the entire body by blocking or deflecting missiles and drastically lowering blast wave forces.
